 |
TP-90B |
TP-90B does not have hydroxyl group, not react in the system, non-volatile and water incompatible. TP-90B viscosity is very low and can be as solvents and toughening agent.TP-90B can increase the thickness of cover corners and improve th... |
|
|
 |
SIFCLEAR? F101-F102 |
F101-F102 are for the JSR aqueous fluorocarbon resins, the features are excellent weather resistance, high stain resistance, good adhesion, heat insulation and environmentally friendly paints. |
|
|
 |
Deogrip Micro R 1610 |
Matting and Softtouch additive for use even in 100% UV coating systems. Deogrip Micro R 1610 is based on a combination of Castor Oil and Acrylat polymer, which is finely dispersed in DPGDA .Matting and soft feel effect takes place independently of... |
|
|
 |
HALLCOTER HECA |
HALLCOTE HECA helps formulators produce high-quality, ultra-low VOC latex paints and coatings. HECA is odorless and offers an 80% reduction in VOCs compared with Texanol and meets and exceeds international regulations for no VOCs. HECA w... |
|
|
 |
TegMeR 812 |
TegMeR 812 is an ester plasticizer specially designed for high polarity polymers used in high temperature applications.TegMeR 812 has excellent compatiblity with acrylic elastomers (Vamac®) and HNBR. |
|
|
 |
TegMeR? 804 SPECIAL |
TegMeR® 804 Special is tetraethylene glycol ester plasticizer for high polarity elastomers and plastics. This plasticizer has
excellent compatibility in acrylic resin.TegMeR 804 Special offers good resistance to water extraction and goo... |
|
|
 |
SUPRMIX? 140 |
SUPRMIX® 140 is a low visocosity trialky phosphate that acts as a plasticizer and a flame retardant. SUPRMIX® 140 is a free-flowing powdered dispersion on a amorphous silica carrier. It is an excellent low temperature plasticizer for&... |
|
|
 |
Deogrip Micro R 1510 |
Matting and 80fttouch additive for use even in 100% UV coating systems.Deogrip Micro R 1510 is based on a castor oil polymer, which is finely dispersed in DPGDA.Matting and soft feel effect takes place independ... |
|
|
 |
Deogrip Micro S 1010 |
Matting, softtouch and antislip additive for solvent-based paints and varnishes. Deogrip Micro S 1010 enables excellent and very constant matting. Compared with conventional matting additives Deogrip Micro S 10... |
|
|
 |
Deogrip Micro A 2010 |
is an excellent matting agent, providing a very constant and silky matt surface. Compared with conventinal matting additives based on silica, Deogrip Micro A 2010 completely avoids brightening,clouds ... |
|
|
 |
Deolink EH 269 modified silane |
The methoxysilyl groups in Deolink EH 269 are able to react by hydrolysis to the corresponding silanols, which can perform a cross link to an inorganic substrate. The containing epoxy groups are able to interact wit... |
|
|
 |
Deolink EH 271 modified silane |
The alkoxysilyl groups in Deolink EH 271 are able to react by hydrolysis to the corresponding silanols, which can perform a cross link to an inorganic substrate. The containing primary amino groups are able to inter... |
|
|
 |
Deolink EH 276 modified silane |
The methoxysilyl groups in Deolink EH 276 are able to react by hydrolysis to the corresponding silanols, which can perform a cross link to an inorganic substrate. The containing epoxy groups are able to interact wit... |
|
|
 |
Deolink Epoxy TE 50 DL |
Deolink Epoxy TE 50 DL is an organofunctional coupling agent that provides a chemical link between organic polymer and inorganic substrates or fillers. Deolink Epoxy TE 50 DL is compatible with various polymers; the powder form enab... |
|
|
 |
Deogrip WPF |
Softtouch additive and antislip agent for coating systems.Deogrip WPF is specially suited for use in powder coatings.Typical dosage ranges from 5 to 15 %, but can deviate in single cases. Due to the usage of Deogrip... |
|
|
|